MENÜ
  • English Deutsch
  • Welcome back!

    Car search

    A4 B7 Avant

    More sub categories: zu A4 B7 Avant

     Tuning Parts for Audi A4 B7 Avant 1.6, 1.8 TFSI, 1.8T, 1.9 TDI, 2.0 TDI, 2.0 TFSI, 2.5 TDI, 2.7 TDI 3.0L V6 + Quattro

    We offer a wide range of tuning parts for the Audi A4 B7 Avant 1.6, 1.8 TFSI, 1.8T, 1.9 TDI, 2.0 TDI, 2.0 TFSI, 2.5 TDI, 2.7 TDI 3.0L V6 + Quattro. Most parts are plug and play, i.e., the original part is replaced, and the tuning part is installed without modification or with minimal adjustment. This saves a lot of work, money, and time.

    Turbochargers

    The heart of the 1.8T, besides the engine, is the turbocharger. We offer various upgrade turbochargers such as the K04-015 with a larger compressor wheel, turbine wheel, and reinforced actuator plug and play, because weaker actuators cannot maintain the boost pressure at a certain level and begin to flutter; therefore, stronger actuators are needed. As a rule of thumb, from an opening pressure of 0.5 bar, the actuator can realize a holding pressure of about 1.3 bar and then starts to flutter. With this, up to 300hp are possible. The turbocharger is hardly visually distinguishable from the original. We carry original Borgwarner as well as our own brand "Turbo-parts.de" which we have been successfully selling for over 13 years. These are all finely balanced and have a long lifespan. For the turbocharger to get enough exhaust gases, a suitable exhaust manifold is required. Here again, we offer upgrade manifolds with a larger pipe cross-section that can be simply swapped out with the original manifold. For conversions with universal turbos e.g., GT28 Turbo or GT30 etc., a manifold with the matching flange T25 or T3 is needed, which we also have in our program. If your exhaust housing for your original turbo or upgrade turbo is cracked/damaged, you can also purchase it from us.

    Just having the turbocharger is not enough. Naturally, the surrounding parts also need to be changed to extract optimal performance from the engine.

    Exhaust Technology

    To generate as little back pressure as possible, downpipes with a larger diameter e.g., 76mm are needed, to relieve the turbo and reduce back pressure. We also offer these with TÜV certification and with 200 cell or 100 cell sports catalytic converters.

    To achieve a resonant sound and to allow sufficient exhaust gases to escape, we have various sports exhaust systems usually from Simons in Sweden with EU approval, meaning they do not need to be registered and can be legally used on the road.

    Intake

    With upgrade turbos or power-boosted engines, the original intake hoses often collapse leading to a loss of power. We offer reinforced silicone hoses e.g., intake hoses or boost pressure hoses that withstand the power. To achieve more airflow, sport air filters and larger intake manifolds ensure optimal ventilation. Blow-off valves, also known as Pop-Off or SUV, are essential for the 1.8T as they must also be closed, otherwise, the MAF sensor is missing the air diverted into the atmosphere during the calculation. Therefore, open valves are not suitable for the 1.8T with the original fuel injection system.

     

    Power Transmission

    To transfer the power to the road, sports clutches are essential. We have complete kits with a single mass flywheel, pressure plate, organic clutch disc, and release bearing that are also roadworthy; sprung sintered metal plates are also suitable for the road, only unsprung ones are more recommended for motorsport.

    Cooling

    To get cool air into the engine, a larger intercooler kit or an upgrade intercooler is needed, as cooler air is denser and contains more air mass which again leads to more power. Especially noticeable in summer or during long motorway drives. For conversions with replacement turbochargers, other oil- and water lines are also needed.

    Engine Technology

    To enable the engine to withstand certain performances, forged pistons are installed. We have had good experiences with JE Pistons and Wiseco.

    Upgrade Turbo Kits

    For a complete solution, we have pre-configured, matched upgrade turbo kits that contain almost everything needed for the conversion.  

     

    Competent Support for Your Purchase

    If you can't find the right part for your vehicle among the various categories or are unsure whether a selected part can be used in your car, don't hesitate to contact us! We are happy to advise you with a call to our phone number 041014809005 and together find the accessories you need for your tuning project. Outside our business hours, you can also send your questions to us by email at info@tur Bei uns kaufen Sie A4 B7 Avant günstig online.