Intercooler 700x300x100mm Aluminum - 76mm Connections

- RS 700x300x100 intercooler made of aluminum up to 5 bar

Technical data:

- Overall dimensions L 880mm x H 300mm x B 100mm

- Core dimensions L 700mm x H 300mm x B 100mm

- 2x connections 76mm

- Operating pressure up to 5 bar

- 5x M8 mounting points

Suitable for:

- Turbocharged engines from 2L to 6L

Description:

The intercooler is installed between the turbocharger and the intake manifold. The purpose of an intercooler is to cool down the air that has been heated by the turbocharger. By cooling down the compressed air, more air mass can enter the combustion chamber at the same volume, allowing more fuel to be burned, thus increasing power and efficiency. The lower the intake air temperature, the lower the thermal load on the engine and the turbocharger, as the turbocharger requires less speed for the same air mass. Fuel consumption is also reduced and the engine achieves slightly better exhaust gas values, provided that the control unit is adjusted accordingly. It is important to ensure that the intercooler receives as much airflow as possible. The coolers can be used in turbocharged diesel and gasoline engines. When choosing, it should be ensured that the intercooler is not too large for the engine, as this would negatively affect response, but it should also not be too small. The intercooler offered here is completely made of aluminum with cast boxes, has five M8 threaded mounting points and a barn plate core, ideal for motorsport and tuning. Each intercooler is tested up to 5 bar before delivery.