Scope of delivery:
1x Adapter 1/2 NPT > Hose Connection 16mm
1x Metal Gasket for T25/T28 Flange
1x Gasket for Oil Return GT
1x Clamp HD Wide-Band Clamp 87-79mm for 76mm Silicone Stainless Steel 19mm wide
1x Silicone Reducer straight 76x60mm inner diameter blue L 100mm 4-ply 5mm wall thickness
1x Turbocharger GTR-2571R (GT25) 360HP T25 Wastegate 60 A/R-49A/R 360° Race Bearing
2x Copper Gasket M12
1x Flange V2A for Fiat Coupe 20v on original downpipe with GTR-25 Turbocharger
1x Ring Eye M12 to D04
1x Retaining Plate Wastegate Fresh Air Housing for GT28xx GT35 Turbocharger
1x Clamp HD Wide-Band Clamp 71-63mm for 60mm Silicone Stainless Steel 19mm wide
1x Adapter for Oil Supply to GT25 GTR-2871 3mm Bore
7x Countersunk Screw M8x20
1x Metal Gasket for Downpipe Flange GTR-25, GTR-2571, GTR-2582 with 49A/R
1x Oil Supply Line D04 7/16 UNF 90° + D04 straight Connections 50cm PTFE Teflon
1x Flange for Oil Return for GT-R Ball Bearing Turbos with 1/2 NPT Internal Thread
Technical Specifications Turbocharger:
- Compressor Housing exterior A/R 60
- Compressor Wheel 71>54.13mm
- Turbine Housing 49 A/R
- 360° Degree Race Bearing
- T25 Flange (Hole Measurements center measured: 73x40mm)
- Oil Cooled
- Water Cooled
- Shaft is Precision Balanced
- up to approx. 1.6 Bar
- up to 360HP
Description:
the upgrade Turbocharger GTR-2571 is simply swapped out with the original turbocharger. No modifications, no welding required. A special downpipe flange included in the kit, which directly fits the original Downipe. Thanks to the small exhaust housing of 49A/R, it responds early. The maximum power with this turbo is about 320HP, to achieve this, larger injectors, a 255L/h Fuel Pump and upgrade Intercooler must be used. The engine control must then be adjusted to the components.
Suitable for:
- all Fiat Coupe 20v Turbo 5 Cylinders.
Note: The above-mentioned turbocharger is intended for motorsport and does not comply with any manufacturer-approved version. If the installation changes the vehicles performance data, the general operating permit and insurance cover are voided. Therefore, a warranty cannot be assumed. We also do not accept liability for consequential damages.This Product was added to our catalogue on 07/01/2011.